 Best Sellers | | Home Electrix Illumination 2225Z-BK Portable Swing Arm Incandescent Desk Lamp, 28 Reach, Metal Shade/Base, Black | |
|  | |  | | | Electrix Illumination 2225Z-BK Portable Swing Arm Incandescent Desk Lamp, 28 Reach, Metal Shade/Base, Black | | | | | | | | | | SKU:
USELE2225ZBK | | Availability:
Out of stock | | |
|
| | Features | Portable Incandescent Desk Lamp.Made in U.S.A.Spring-suspension swing arm with 28" reach.Precision swivel metal shade.Color: BlackSpring-suspension swing arm with 28-inch reachPrecision swivel metal shadePortable Incandescent Desk Lamp. Black. Made in U.S.A.Black.
| |
| | Description | Black. Made in U.S.A. Spring-suspension swing arm with 28" reach. Precision swivel metal shade. Weighted metal base. Accepts 100W bulb, GEL41036 (sold separately). | |
| | Product Details | | Product Length: | 17.9 inches | | Product Width: | 8.4 inches | | Product Height: | 7.1 inches | | Product Weight: | 0.06 pounds | | Package Length: | 18.0 inches | | Package Width: | 8.7 inches | | Package Height: | 6.9 inches | | Package Weight: | 5.8 pounds | | Average Customer Rating: |  based on 6 reviews |
| |
| | Customer Reviews | Average Customer Review: ( 6 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
25 of 26 found the following review helpful:
 "Reach" is only 18" and the base is too light Dec 22, 2008
By Victor H. Agresti
"remodeling-guy"
Electrix Illumination 2225Z-BK Desk Lamp
Pros:
- Even though Electrix calls this an "incandescent" desk lamp, 13w compact florescents (equivalent to 60 watt bulbs), or smaller, will fit. Higher wattage mini or micro-mini compacts with larger diameter bottoms, won't fit. However, the lamp accepts virtually any incandescent bulb you might want to use. I've settled on a 75 watt incandescent, since it projects plenty of white, non-flickering light, and comes on instantly.
- Although this lamp may, at first glance, appear similar to inexpensive models sold by stores such as Staples and Office Depot, that's where the similarity ends. The Electrix (except for the base) is very good quality. The lamp head stays where you put it, with no slipping down or frame drooping. The "plates" at the three points where the frame sections intersect are steel instead of the usual plastic found on cheaper models. The switch is the on/off type sold at most hardware or lamp stores, in case it ever needs replacing. The paint is well done.
- An inner shade keeps the outer shade cooler and increases light output because it's white. With a 75 watt bulb, the outer shade still gets hot, but not so much that you can't hold it during adjustment. A 100 watt incandescent is too bright for my tastes, plus the outer shade then gets too hot to handle. There is a small wire handle at the shade's bottom for movement, if the heat bothers you. I'll switch to a 13w compact florescent in the summer, since that type of bulb doesn't [also] heat the room.
Cons:
- The base isn't nearly heavy enough. Rotate the lamp only a little to one side and the whole thing falls over. The base support post must be at the furthest point away from the lamp head for any stability at all. Fully extend the lamp outward from there, and it only reaches 18" (support post to center of bulb); not even close to the 28" claimed. At an 18" extension, the lamp slowly falls over and you have to catch it to prevent it from crashing down. Raised all the way vertically, with the shade pointed down, the bottom of the shade is 19" above the desk.
Other:
- To see this lamp next to a computer keyboard, to get a feel for its size, click on Customer Images, above.
- Although shoplet dot com shipped the lamp in the factory box, rather than packing it in a secondary box, it arrived undamaged.
Summary:
Shame on Electrix for the tip-over design, which severely limits lamp head positioning. The cast iron weight in the base should be twice as heavy, at least. I threw the factory base in the trash and mounted the lamp in a desk lamp clamp from my previous desk lamp. Now, it won't tip over no matter how it's positioned, or how far it's extended. Electrix is well aware of this design defect, proven by the fact that they install a machine "stop" screw in the base plate to prevent the lamp from extending beyond 18" to reduce tip-overs. With a desk clamp supporting the lamp, the stop screw can be removed, allowing the lamp to extend up to 24" (if laid almost flat), and to also allow it move backward two more inches. I'm satisfied with the lamp ONLY because I happened to have that desk lamp clamp. Mounting the lamp in the supplied base was unacceptable to me. Three stars is generous.
4 of 4 found the following review helpful:
One Flaw Jul 02, 2010
By BillS
This is an excellent desk lamp if you can live with the one flaw: The base
is too light. Adjusting the lamp may tip the lamp (so you must hold the
base), and bending the lamp over at an angle, depending on the angle,
will also tip the lamp.
0 of 2 found the following review helpful:
Just as expected May 26, 2010
By Rich
Ordered this lamp to replace a bankers lamp on my desk. I needed a brighter light that covered a larger area. The lamp arrived on time, performed as expected, and I am quite satisfied.
0 of 2 found the following review helpful:
Electrix Ilumination 2225Z Sep 16, 2009
By Richard Kurlander
"Richard"
Good choice, but pricey. Quality metal construction. For some reason CFL bulbs don't work, so you'll need to stock up on incandescent bulbs. Note: In about three years 60 watt incandescent light bulbs won't be sold.
1 of 4 found the following review helpful:
 Excellent desk lamp Sep 30, 2008
By Quality Plus
It took a while for my lamp to arrive, but I was very happy when it did. It's not often you can find a really well built lamp these days. I think this unit is definitely worth the money.
I especially like the inner white bulb reflector. You can't see that in the picture, but it serves to focus the light and keep the outer dome cooler.
The outer dome has a little handle to make quick adjustments easy without getting your hands heated up by grabbing it directly.
I'm sure heat wouldn't be as much of an issue with a compact fluorescent. But I hate the light that those things give off and the flickering drives me nuts. Additionally, I'm not interested in having mercury in my house.
Long live the incandesents!!!
Excellent lamp
See all 6 customer reviews on Amazon.com
| |
| |
| |  | |  |
|
Recently Viewed | You may also like ... |
